[Linaro-validation] Using 17.04 images to run V2 jobs on db410c

[Lisa Nguyen]

Hi,

I am interested in running V2 jobs on the dragonboard 410c using the
17.04 bootloader release files[1] and 17.04 debian release images[2].

The db410c health checks in staging and PMWG labs use the 16.06 files.
The 16.06 version contains sec.dat[3], which does not exist in 17.04.
However, there is a file called sbc_1.0_8016.bin that is included in
17.04. I compared the contents of the 16.06 and 17.04 bootloader zip
files to be sure[4].

Where I would include the sbc_1.0_8016.bin file in the job definition?
Would it be simple as adding an entry like

cdt:
url: <path/to/sbc_1.0_8016.bin_file>

This is where I'm not sure about.

Regards,
Lisa

[1] http://builds.96boards.org/releases/dragonboard410c/linaro/rescue/17.04/
[2] http://builds.96boards.org/releases/dragonboard410c/linaro/debian/17.04/
[3] https://pmwg.validation.linaro.org/scheduler/job/1800/definition#defline49
[4] https://hastebin.com/asosohiyis.rb

[Neil Williams]

On Tue, 20 Jun 2017 14:00:53 -0700

Post by Lisa Nguyen
Hi,
I am interested in running V2 jobs on the dragonboard 410c using the
17.04 bootloader release files[1] and 17.04 debian release images[2].
The db410c health checks in staging and PMWG labs use the 16.06 files.
The 16.06 version contains sec.dat[3], which does not exist in 17.04.
However, there is a file called sbc_1.0_8016.bin that is included in
17.04. I compared the contents of the 16.06 and 17.04 bootloader zip
files to be sure[4].

The available partitions are shown in the device configuration which
can be downloaded from the UI:
https://staging.validation.linaro.org/scheduler/device/staging-db410c-01/devicedict/plain

That shows an entry 'sbl1' which could be related to sbc_1 but it would
be useful to have some documentation from 96boards on this. Try
searching the 96boards forums to find out what that file is meant to do.

http://www.96boards.org/find/#gsc.tab=0&gsc.q=sbl_1%20410c

[Lisa Nguyen]

Post by Neil Williams
On Tue, 20 Jun 2017 14:00:53 -0700

Post by Lisa Nguyen
Hi,
I am interested in running V2 jobs on the dragonboard 410c using the
17.04 bootloader release files[1] and 17.04 debian release images[2].
The db410c health checks in staging and PMWG labs use the 16.06 files.
The 16.06 version contains sec.dat[3], which does not exist in 17.04.
However, there is a file called sbc_1.0_8016.bin that is included in
17.04. I compared the contents of the 16.06 and 17.04 bootloader zip
files to be sure[4].

The available partitions are shown in the device configuration which
https://staging.validation.linaro.org/scheduler/device/staging-db410c-01/devicedict/plain
That shows an entry 'sbl1' which could be related to sbc_1 but it would
be useful to have some documentation from 96boards on this. Try
searching the 96boards forums to find out what that file is meant to do.
http://www.96boards.org/find/#gsc.tab=0&gsc.q=sbl_1%20410c

I posted a question about finding the latest bootloader information
for db410c, and Nicolas was able to explain what the sbc_1.0_8016.bin
file does.

https://discuss.96boards.org/t/documentation-on-db410c-bootloader-files/2124/2

Based on Nico's response, does the device config need to be updated to
include the cdt partition?

[Neil Williams]

On Thu, 22 Jun 2017 09:27:35 -0700

Post by Lisa Nguyen

Post by Neil Williams
On Tue, 20 Jun 2017 14:00:53 -0700

Post by Lisa Nguyen
Hi,
I am interested in running V2 jobs on the dragonboard 410c using
the 17.04 bootloader release files[1] and 17.04 debian release
images[2].
The db410c health checks in staging and PMWG labs use the 16.06
files. The 16.06 version contains sec.dat[3], which does not exist
in 17.04. However, there is a file called sbc_1.0_8016.bin that is
included in 17.04. I compared the contents of the 16.06 and 17.04
bootloader zip files to be sure[4].

The available partitions are shown in the device configuration which
https://staging.validation.linaro.org/scheduler/device/staging-db410c-01/devicedict/plain
That shows an entry 'sbl1' which could be related to sbc_1 but it
would be useful to have some documentation from 96boards on this.
Try searching the 96boards forums to find out what that file is
meant to do.
http://www.96boards.org/find/#gsc.tab=0&gsc.q=sbl_1%20410c

I posted a question about finding the latest bootloader information
for db410c, and Nicolas was able to explain what the sbc_1.0_8016.bin
file does.
https://discuss.96boards.org/t/documentation-on-db410c-bootloader-files/2124/2
Based on Nico's response, does the device config need to be updated to
include the cdt partition?

Why do you think you need to modify the content of this partition? From
that answer, it looks more like an admin change.